Serving the Dallas-Fort Worth Metroplex
    Cantilever Rack system inside a Texas warehouse
    Richardson, Texas

    Cantilever Rack in Richardson, TX

    Richardson's Innovation Quarter, also known as The IQ, gives real local context to a storage conversation involving technology and manufacturing. A store with many components can need precise access more than additional depth. Before changing the rack arrangement, distinguish recurring reserve loads from the varied parts and containers needed for individual production tasks.

    Long stock in a Richardson manufacturing store should not be forced into the same access arrangement as compact components. Cantilever rack offers open-front supported positions. Compare complete lengths, shorter remnants, and the lifting method while keeping the long-load approach away from the paths used for frequent boxed-part picks.

    Compare cantilever rack with a Free Design Consultation, CAD layout, and itemized quote from Dallas Pallet Racks, a division of Warehouse Equipment & Supplies Co.

    (214) 380-2954

    Why Richardson Warehouses Work With Us

    The IQ and Richardson's historic Telecom Corridor are geographic and industrial reference points, not evidence of any customer's storage process. For a technology-oriented operation, compare the range of components with the quantities held per item. A broad parts list and a repeated full-pallet lot create different requirements for accessibility and reserve storage.

    Our Free Design Consultation helps translate those requirements into a CAD layout. Separate the active component store from replenishment reserve and show how material travels to the work it supports. The discussion should explain which items can share a storage sequence and which must be selected independently, rather than assuming all inventory belongs in one configuration.

    For a facility using US 75, receiving and dispatch still need floor assignments inside the proposal. Your itemized quote identifies the proposed components and scope, giving the operations team a basis for comparing access, stored quantity, and the room needed for handling.

    Separate long-material handling from compact component access in the CAD plan. Compare support spacing with the whole length range and show room for retrieving the complete load, not merely enough clearance to stand beside the arms.

    Free Design Consultation
    CAD layout with position counts
    Rack supply and installation
    Cantilever warehouse racking holding steel tubing
    Cantilever rack storing lumber and wood products

    Operations We Rack Around Here

    Serving warehouses around Telecom Corridor, Plano Parkway, Greenville Avenue, Glenville.

    Technology and electronics
    Medical devices
    Light assembly
    Component distribution

    How Cantilever Rack Works

    Arms with nothing in front of them, built for lumber, pipe, and anything a pallet can't hold.

    1

    Columns and anchored bases

    Upright columns sit on anchored bases. Base depth is set by load and arm length so the run stays stable even under an off-center pick.

    2

    Arms at adjustable heights

    Arms bolt or pin into the column at set increments and move as your product mix changes. Straight arms suit boxed goods; inclined arms with a lip hold round or loose stock in place.

    3

    Column spacing against sag

    Spacing between columns is set so bundles don't sag between arms. Support spacing depends on load length, stiffness, weight distribution, and the rack manufacturer’s recommendations.

    4

    Single-sided or double-sided

    Single-sided runs go against a wall. Double-sided runs stand in open floor and load from both faces, using both faces of a shared column structure.

    What a Cantilever Rack Project Includes

    A cantilever rack project begins with a discussion of your inventory and handling goals. We consider the stored loads, their weight range, how often they move, and which items need immediate access. For Richardson operations, separate long-stock handling from compact electronics or parts storage. That local layout consideration is evaluated alongside the system’s basic storage requirements rather than treated as a reason to choose the same rack for every building.

    The CAD proposal shows the storage arrangement, usable levels, access routes, and supported load positions. From there we set column height and spacing, choose straight or inclined arms, and decide whether lips are needed to keep round stock from rolling. Single-sided runs get positioned along a wall; double-sided runs get aisle dimensions matched to whatever's moving material in and out. Where comparing two rack types is useful, the discussion explains what changes in access, rotation, and capacity. The result is a layout you can review with your operations team rather than a quantity of rack without an operating plan.

    Your itemized quote identifies the rack structure, load-support components, and accessories included in the scope. Product availability, delivery, and installation are discussed before the order proceeds; the schedule depends on the selected system and project size. The quote itemizes columns, bases, arms, bracing, and anchors, with a CAD drawing showing the run, arm levels, and rated capacities per arm. Installation partners anchor bases, plumb columns, brace the run, and set arm elevations to the drawing.

    After approval, the project moves forward against the agreed layout and scope. The documentation provides a reference for storage assignments and rated capacities. If the inventory mix later changes, you can discuss additional supported load positions, a different lane arrangement, or a complementary rack type without assuming every existing component can be reused. Compatibility and capacity must be checked for the proposed configuration.

    Lumber, plywood, and sheet goods
    Pipe, tube, conduit, and bar stock
    Steel service center inventory
    Furniture, doors, and windows
    Long or awkward loads currently sitting on the floor
    Call (214) 380-2954

    Recent Installations

    Racking projects completed for warehouses across Dallas–Fort Worth.

    Teardrop pallet rack bays with blue uprights and orange beams
    Tall blue pallet rack frames with diagonal bracing under a wood truss roof
    Long pallet rack aisle with yellow column guards in a distribution center
    Rows of green and orange selective pallet rack in an empty distribution center
    Green pallet rack uprights with orange beams in a high-bay warehouse
    Narrow pallet rack aisle stocked with cartons on several beam levels
    Pallet rack installation in progress with a scissor lift in a large warehouse
    Pallet rack with wire mesh decking above a warehouse work area
    Pallet rack bays with wire decking on multiple beam levels
    Green pallet rack frames with orange beams and a yellow post protector

    Get a Cantilever Rack Quote for Your Richardson Warehouse

    Send the basics and we will follow up with a layout and pricing. Prefer to talk it through? Call (214) 380-2954.

    Dallas Pallet Racks

    2442 S Collins St.

    Ste 108 #2359

    Arlington, TX 76014

    (214) 380-2954

    Monday - Friday: 8:00 AM - 6:00 PM

    We respect your privacy. Your information will never be shared.

    Cantilever Rack Questions We Hear Most

    How is cantilever rack different from pallet rack?

    Selective pallet rack uses beams between upright frames to support palletized loads. Cantilever has an open front, so long material loads from the side and slides in without clearing an obstruction - that's the entire reason the system exists.

    How far apart should the columns be?

    Close enough that the load doesn't sag between arms. Support spacing depends on the material’s stiffness, bundle length, and weight distribution. The rack and material requirements determine the number and spacing of supports, rather than one rule for every load.

    Straight arms or inclined arms?

    Straight arms suit boxed, banded, or sheet goods. Inclined arms, usually fitted with a lip, keep pipe, tube, and round stock from rolling forward off the arm. Many runs mix both across different levels.

    Can arms or levels be added later?

    Yes. Arms mount at set increments up the column, so levels can be added or repositioned as your product mix shifts, as long as total load stays within the rated capacity of the column and base.

    Does cantilever rack need to be anchored to the floor?

    Yes - bases are anchored to the floor, and taller or double-sided runs get braced between columns. Anchors and bracing are priced into the quote rather than left for the installer to sort out on-site.

    How should Richardson long-stock storage be separated from compact parts picking?

    Provide a dedicated cantilever working face and approach for the full material length. Keep component picking out of that path, and check the support configuration for remaining short pieces as well as full bundles.

    How should an IQ component store place reserve replenishment beside cantilever rack?

    Keep reserve handling distinct from the active component release. The next material request should remain accessible while another container or pallet is brought in to replenish the store. Separate long-material handling from compact component access in the CAD plan. Compare support spacing with the whole length range and show room for retrieving the complete load, not merely enough clearance to stand beside the arms.

    What should a Richardson technology operation compare when product revisions change stock assigned to cantilever rack?

    A product revision can change the number of active parts and the container mix without increasing stock per part. Review assignments and access instead of assuming the original storage depth remains appropriate. Provide a dedicated cantilever working face and approach for the full material length. Keep component picking out of that path, and check the support configuration for remaining short pieces as well as full bundles.

    Other Rack Types We Supply in Richardson

    Nearby Areas We Also Serve

    We serve the Dallas–Fort Worth metroplex with storage layouts, rack supply, and installation. Compare the same rack type in another service area below.

    Where We Work

    Based in Arlington, we serve the DFW metroplex with industrial pallet racks and warehouse storage solutions.

    Dallas Pallet Racks

    Address

    2442 S Collins St.
    Ste 108 #2359
    Arlington, TX 76014

    Business Hours

    Monday - Friday: 8:00 AM - 6:00 PM
    Saturday: Closed
    Sunday: Closed

    Need Cantilever Rack in Richardson?

    Call (214) 380-2954 or request a quote and we will get a layout started.

    (214) 380-2954
    Tap to Call