Serving the Dallas-Fort Worth Metroplex
    Drive-In Rack system inside a Texas warehouse
    Irving, Texas

    Drive-In Rack in Irving, TX

    In Irving, storage near DFW Airport has to be distinguished from freight that is merely passing through. The Freeport area and Royal Lane give the location context, but not every receipt belongs in long-term reserve. Decide what must remain available for a near-term release before allocating floor space to another rack system.

    Drive-in rack suits a different inventory role from short-stay Irving airport freight. Repeated reserve pallets may justify deep lanes; mixed loads awaiting individual releases often do not. Before reducing aisles near Freeport, compare the stock held by SKU with the access needed for each outgoing load, not merely the total pallets received.

    Compare drive-in rack with a Free Design Consultation, CAD layout, and itemized quote from Dallas Pallet Racks, a division of Warehouse Equipment & Supplies Co.

    (214) 380-2954

    Why Irving Warehouses Work With Us

    An airport-facing warehouse can have stored inventory, transfer freight, and outbound loads on the floor at the same time. Around Irving's Freeport area, those categories are worth separating before selecting storage depth. A pallet awaiting the next movement is not necessarily reserve inventory, and giving it a deep position can create another retrieval task.

    Our consultation starts with that operating distinction. The CAD layout should identify the loads assigned to rack and the loads that remain in temporary staging, with clear access between the two. You can compare alternatives without assuming all available floor space should become storage or all inventory should follow one release sequence.

    Royal Lane and the airport connection provide geographic context for receiving and dispatch, not a service-time guarantee. Dallas Pallet Racks provides a Free Design Consultation and itemized quote so your team can evaluate the proposed system, access requirements, and installation scope together.

    Dedicate lanes to repeated reserve lots and keep transfers in accessible staging. Review lane entry and truck fit, then compare normal fill against the risk of several partly empty lanes occupying the area intended to add capacity.

    Free Design Consultation
    CAD layout with position counts
    Rack supply and installation
    Drive-in pallet rack lanes fitted with continuous rails
    Drive-in warehouse racking loaded with bulk pallets

    Operations We Rack Around Here

    Serving warehouses around Las Colinas, DFW Trade Center, Valley Ranch, Freeport, Royal Lane corridor.

    Air cargo and freight forwarding
    Pharmaceutical distribution
    Tech hardware
    Cross-dock operations

    How Drive-In Rack Works

    Deep storage lanes replace intermediate aisles. The forklift enters the structure to place and retrieve pallets.

    1

    Continuous rails, not beams

    Pallets rest on rails carried by upright frames rather than individual beam levels, so a lane accepts pallet after pallet at the same elevation.

    2

    The truck enters the lane

    The driver travels inside the bay to place or retrieve each load. Lane width, rail height, and mast clearance get dimensioned to that specific truck, not a generic one.

    3

    One open end or two

    One open end gives LIFO and high storage density. Two open ends give FIFO with slightly fewer positions, since each lane now needs clearance from both sides.

    4

    Guarding built into the design

    Guide rails, column guards, and rail-end protection are part of the spec from the start, because a lane that takes daily contact from forklifts needs protection built in from day one.

    What a Drive-In Rack Project Includes

    A drive-in rack project begins with a discussion of your inventory and handling goals. We consider the stored loads, their weight range, how often they move, and which items need immediate access. For Irving operations, compare bulk reserve depth with dispatch space around Freeport. That local layout consideration is evaluated alongside the system’s basic storage requirements rather than treated as a reason to choose the same rack for every building.

    The CAD proposal shows the storage arrangement, usable levels, access routes, and pallet positions. Next we look at SKU depth. Drive-in rewards deep lanes of a single product and punishes variety - if a lane never fills, you've built an expensive way to store less than you could have with selective. Where the inventory profile is mixed, we'll usually recommend a hybrid: selective at the pick face, drive-in behind it for reserve. Where comparing two rack types is useful, the discussion explains what changes in access, rotation, and capacity. The result is a layout you can review with your operations team rather than a quantity of rack without an operating plan.

    Your itemized quote identifies the rack structure, load-support components, and accessories included in the scope. Product availability, delivery, and installation are discussed before the order proceeds; the schedule depends on the selected system and project size. The quote itemizes frames, rails, rail supports, guide rails, and column protection, with a CAD drawing showing lane depth, rail elevations, and total positions. Installation partners anchor, plumb, and align every rail run, then verify a loaded pallet travels the full lane before handing the system over.

    After approval, the project moves forward against the agreed layout and scope. The documentation provides a reference for storage assignments and rated capacities. If the inventory mix later changes, you can discuss additional pallet positions, a different lane arrangement, or a complementary rack type without assuming every existing component can be reused. Compatibility and capacity must be checked for the proposed configuration.

    High volume of a small number of SKUs
    Seasonal or buffer inventory held in bulk
    Cold storage and freezer rooms where cube matters most
    Product too fragile to floor-stack more than two high
    Buildings where floor space, not height, is the binding constraint
    Call (214) 380-2954

    Recent Installations

    Racking projects completed for warehouses across Dallas–Fort Worth.

    Teardrop pallet rack bays with blue uprights and orange beams
    Tall blue pallet rack frames with diagonal bracing under a wood truss roof
    Long pallet rack aisle with yellow column guards in a distribution center
    Rows of green and orange selective pallet rack in an empty distribution center
    Green pallet rack uprights with orange beams in a high-bay warehouse
    Narrow pallet rack aisle stocked with cartons on several beam levels
    Pallet rack installation in progress with a scissor lift in a large warehouse
    Pallet rack with wire mesh decking above a warehouse work area
    Pallet rack bays with wire decking on multiple beam levels
    Green pallet rack frames with orange beams and a yellow post protector

    Get a Drive-In Rack Quote for Your Irving Warehouse

    Send the basics and we will follow up with a layout and pricing. Prefer to talk it through? Call (214) 380-2954.

    Dallas Pallet Racks

    2442 S Collins St.

    Ste 108 #2359

    Arlington, TX 76014

    (214) 380-2954

    Monday - Friday: 8:00 AM - 6:00 PM

    We respect your privacy. Your information will never be shared.

    Drive-In Rack Questions We Hear Most

    How much floor space does drive-in rack actually save?

    Trading aisles for lanes typically shrinks the footprint for the same pallet count by roughly a third, sometimes more in a taller building. We give you the side-by-side numbers in the layout rather than a rule of thumb.

    What's the difference between drive-in and drive-through rack?

    Drive-in is open at one end and runs LIFO - highest density. Drive-through is open at both ends and allows FIFO, at the cost of some positions and a second access aisle.

    Does drive-in slow down put-away?

    It can, since the truck has to travel into the lane for every pallet. It works best for bulk moves rather than piece picking - pairing it with a selective pick face keeps daily order fulfillment from bogging down.

    How do you keep lift trucks from damaging the rack?

    Floor-mounted guide rails steer the truck through the lane, and column guards plus rail-end protection absorb the contact that still happens. Both get specified with the system up front, not bolted on after the first impact.

    Can a drive-in system be reconfigured later?

    Rail elevations can be reset for a different pallet height, and lanes shortened or added. If SKU count grows enough that lanes stop filling, sections can be converted back toward selective racking.

    Is drive-in rack appropriate for mixed airport transfer loads in Irving?

    Usually those loads need another access strategy. Drive-in should be evaluated for repeated pallet lots whose retrieval sequence suits the operation, not for assorted freight with independently scheduled release times.

    How should Freeport transfer freight be kept apart from drive-in rack?

    Distinguish short-stay transfer loads from inventory assigned to storage. Give transfer freight a staging area so a near-term release does not require opening a reserve lane or interrupting the picking face. Dedicate lanes to repeated reserve lots and keep transfers in accessible staging. Review lane entry and truck fit, then compare normal fill against the risk of several partly empty lanes occupying the area intended to add capacity.

    What should a Royal Lane warehouse check before dedicating more floor area to drive-in rack?

    Check how long each category of freight stays and which loads must leave next. The storage allocation should reflect dwell time and access needs rather than counting every arriving pallet as reserve stock. Usually those loads need another access strategy. Drive-in should be evaluated for repeated pallet lots whose retrieval sequence suits the operation, not for assorted freight with independently scheduled release times.

    Other Rack Types We Supply in Irving

    Nearby Areas We Also Serve

    We serve the Dallas–Fort Worth metroplex with storage layouts, rack supply, and installation. Compare the same rack type in another service area below.

    Where We Work

    Based in Arlington, we serve the DFW metroplex with industrial pallet racks and warehouse storage solutions.

    Dallas Pallet Racks

    Address

    2442 S Collins St.
    Ste 108 #2359
    Arlington, TX 76014

    Business Hours

    Monday - Friday: 8:00 AM - 6:00 PM
    Saturday: Closed
    Sunday: Closed

    Need Drive-In Rack in Irving?

    Call (214) 380-2954 or request a quote and we will get a layout started.

    (214) 380-2954
    Tap to Call