Serving the Dallas-Fort Worth Metroplex
    Pushback Rack system inside a Texas warehouse
    Grand Prairie, Texas

    Pushback Rack in Grand Prairie, TX

    Grand Prairie's share of the Great Southwest Industrial District puts production and distribution beside major road connections. I-20, I-30, and State Highway 161 provide real geographic anchors. Inside the warehouse, the storage problem may be the conflict between reserve goods, active order assembly, and material moving to production, rather than a simple shortage of pallet positions.

    Pushback rack can concentrate recurring Grand Prairie reserve pallets while leaving retrieval at the aisle face. The important comparison is with the daily dispatch pattern: repeated reserve SKUs may suit deep lanes, while mixed order releases still need independent access. Keep those inventory roles separate before replacing single-deep rows with cart lanes.

    Compare pushback rack with a Free Design Consultation, CAD layout, and itemized quote from Dallas Pallet Racks, a division of Warehouse Equipment & Supplies Co.

    (214) 380-2954

    Why Grand Prairie Warehouses Work With Us

    The Great Southwest Industrial District spans more than one city, but a Grand Prairie storage proposal still needs to describe the operation in the particular building. Separate goods held for later shipment from material feeding a work area and from the cases selected for smaller orders. Each role can justify a different rack allocation.

    During a Free Design Consultation, we compare those allocations in a CAD layout. The useful question is which inventory can share depth and which needs its own access, followed by how receiving and retrieval fit around the active work. A storage count should be accompanied by the routes needed to use it, not presented as a substitute for them.

    For facilities connected to I-20, I-30, or Highway 161, include outbound consolidation in that same drawing. The itemized quote identifies the proposed components so your team can review the storage choice and installation scope without assuming every zone should use one system.

    Compare lane depth with the reserve remaining after ordinary dispatch, not only the largest inbound lot. Keep active picks in selective positions and show the space where released pallets are consolidated away from the pushback aisle.

    Free Design Consultation
    CAD layout with position counts
    Rack supply and installation
    High-density pushback rack lanes loaded with pallets
    Pushback pallet racking showing cart rails and load beams

    Operations We Rack Around Here

    Serving warehouses around Great Southwest, Mountain Creek Lake, Lone Star Park area, Mid-Cities industrial.

    E-commerce fulfillment
    Apparel distribution
    Building materials
    Third-party logistics

    How Pushback Rack Works

    Two to six pallets deep from one aisle, without giving up much reach.

    1

    Loading from the aisle

    The driver sets the first pallet on the front cart. Each pallet added after that pushes the cart train deeper into the lane, so one aisle handles the whole depth.

    2

    Carts nested on rails

    Steel carts with nylon or steel wheels ride inclined rails, each nesting under the one ahead of it - that nesting is what makes multi-deep storage possible from a single face.

    3

    Retrieval by gravity

    Pull the front pallet and the next cart rolls forward on the incline to the pick face. No driving into the lane, no repositioning pallets by hand.

    4

    Last in, first out

    Each lane runs LIFO. That suits fast-turning product and any operation managing rotation by lane rather than by individual pallet date.

    What a Pushback Rack Project Includes

    A pushback rack project begins with a discussion of your inventory and handling goals. We consider the stored loads, their weight range, how often they move, and which items need immediate access. For Grand Prairie operations, compare deep reserve lanes with daily dispatch in Great Southwest layouts. That local layout consideration is evaluated alongside the system’s basic storage requirements rather than treated as a reason to choose the same rack for every building.

    The CAD proposal shows the storage arrangement, usable levels, access routes, and pallet positions. Next we set lane depth. Deeper lanes store more, but only pay off if you actually carry that many pallets per SKU - so we compare a two-deep and a four-deep version of the same footprint and show what each does to total positions and to how many pick faces you're left with. Where comparing two rack types is useful, the discussion explains what changes in access, rotation, and capacity. The result is a layout you can review with your operations team rather than a quantity of rack without an operating plan.

    Your itemized quote identifies the rack structure, load-support components, and accessories included in the scope. Product availability, delivery, and installation are discussed before the order proceeds; the schedule depends on the selected system and project size. The quote covers frames, beams, rails, carts, and guarding, itemized so you can see exactly what the added density costs per position - the number that matters more than the sticker price. Rails and carts are set and tested at installation, and cart travel is verified in every lane before handover.

    After approval, the project moves forward against the agreed layout and scope. The documentation provides a reference for storage assignments and rated capacities. If the inventory mix later changes, you can discuss additional pallet positions, a different lane arrangement, or a complementary rack type without assuming every existing component can be reused. Compatibility and capacity must be checked for the proposed configuration.

    Two to six pallets of the same SKU stacked in one lane
    Cold storage or leased space where rent per square foot is steep
    Operations trimming aisle count to add positions
    Beverage, packaging, and consumer goods runs
    Buildings with clear height to spare but limited floor
    Call (214) 380-2954

    Recent Installations

    Racking projects completed for warehouses across Dallas–Fort Worth.

    Teardrop pallet rack bays with blue uprights and orange beams
    Tall blue pallet rack frames with diagonal bracing under a wood truss roof
    Long pallet rack aisle with yellow column guards in a distribution center
    Rows of green and orange selective pallet rack in an empty distribution center
    Green pallet rack uprights with orange beams in a high-bay warehouse
    Narrow pallet rack aisle stocked with cartons on several beam levels
    Pallet rack installation in progress with a scissor lift in a large warehouse
    Pallet rack with wire mesh decking above a warehouse work area
    Pallet rack bays with wire decking on multiple beam levels
    Green pallet rack frames with orange beams and a yellow post protector

    Get a Pushback Rack Quote for Your Grand Prairie Warehouse

    Send the basics and we will follow up with a layout and pricing. Prefer to talk it through? Call (214) 380-2954.

    Dallas Pallet Racks

    2442 S Collins St.

    Ste 108 #2359

    Arlington, TX 76014

    (214) 380-2954

    Monday - Friday: 8:00 AM - 6:00 PM

    We respect your privacy. Your information will never be shared.

    Pushback Rack Questions We Hear Most

    How deep can a pushback lane go?

    Two to six pallets deep is the practical range. Lanes beyond four deep only pay off if you consistently hold that many pallets per SKU - we size lane depth from your inventory profile, not by maxing out the rail.

    How does push back racking compare to drive-in rack?

    Both store deep from one face. With pushback the forklift stays in the aisle and gravity does the work, which avoids driving within the rack structure. Drive-in goes deeper and costs less per position, but the driver has to enter the lane to place and pull loads.

    Will my drivers need retraining?

    Operators should receive system-specific instruction before use. Pushback requires controlled loading and unloading, correct pallet placement, and attention to moving carts; familiarity with selective rack alone is not sufficient.

    What load capacities are available?

    Cart and rail assemblies are commonly rated 2,500 to 4,000 lb per pallet, with heavier configurations available. We specify to your heaviest pallet with margin and hand over ratings for the finished lane.

    Can pushback go into an existing selective row?

    Often. Bay width and frame depth have to suit the cart and rail assembly, so we verify your current frames and connector style first, then convert the bays that work and leave the rest selective.

    How can Grand Prairie pushback reserve support mixed outbound orders?

    Use separate lane assignments for recurring reserve SKUs and another accessible zone for mixed picks. Released goods can then move to consolidation without using the pushback working aisle as a temporary shipping area.

    How should a Great Southwest dispatch zone be positioned beside pushback rack?

    Place order consolidation beyond the storage access route. Goods awaiting collection should not become a temporary barrier between the rack and the next inventory release. Compare lane depth with the reserve remaining after ordinary dispatch, not only the largest inbound lot. Keep active picks in selective positions and show the space where released pallets are consolidated away from the pushback aisle.

    What should a Grand Prairie warehouse compare when production and distribution share pushback rack?

    Separate the quantities released to production from goods stored for shipment. A single position count cannot show whether both kinds of movement remain possible in the proposed arrangement. Use separate lane assignments for recurring reserve SKUs and another accessible zone for mixed picks. Released goods can then move to consolidation without using the pushback working aisle as a temporary shipping area.

    Other Rack Types We Supply in Grand Prairie

    Nearby Areas We Also Serve

    We serve the Dallas–Fort Worth metroplex with storage layouts, rack supply, and installation. Compare the same rack type in another service area below.

    Where We Work

    Based in Arlington, we serve the DFW metroplex with industrial pallet racks and warehouse storage solutions.

    Dallas Pallet Racks

    Address

    2442 S Collins St.
    Ste 108 #2359
    Arlington, TX 76014

    Business Hours

    Monday - Friday: 8:00 AM - 6:00 PM
    Saturday: Closed
    Sunday: Closed

    Need Pushback Rack in Grand Prairie?

    Call (214) 380-2954 or request a quote and we will get a layout started.

    (214) 380-2954
    Tap to Call